Case Study

Abilene Dome

Project Overview

Spray Foam Coating on the Abilene Dome

Discover our portfolio showcasing our work on the Abilene Dome spray foam coating project. We take immense pride in every project we undertake, and the Abilene Dome was no exception. Our team meticulously applied spray foam coating to ensure unparalleled protection and insulation for this iconic structure. Take a closer look at our craftsmanship and dedication to excellence in the images below.

Project Documentation

Before, During & After

Cracked, weathered foam along the lower edge of the dome

Before

Weathered, cracked foam along the lower edge of the dome before the new coating.
Dome wrapped in protective sheeting over the scaffolding

During

Dome enclosed in scaffolding and protective sheeting for the spray foam work.
Wide view of the finished dome complex and carports

After

Finished spray foam coating across the dome and carports.
Project Gallery

Abilene Dome project photos

Dome wall with a sliding glass door and a ladder during the roof work
Dome wall with a sliding glass door and a ladder during the roof work
Scaffolding set up around the dome before the spray foam work
Scaffolding set up around the dome before the spray foam work
Dome wrapped in protective sheeting over the scaffolding
Dome wrapped in protective sheeting over the scaffolding
Dome surface inside the scaffold enclosure
Dome surface inside the scaffold enclosure
Spray foam surface on the dome inside the scaffold enclosure
Spray foam surface on the dome inside the scaffold enclosure
Scaffold planks and framing over the foam-covered dome
Scaffold planks and framing over the foam-covered dome
Scaffold poles and planks against the foam-covered dome
Scaffold poles and planks against the foam-covered dome
Weathered foam layer at a dome window opening
Weathered foam layer at a dome window opening
Deteriorated foam and coating at the base of the dome
Deteriorated foam and coating at the base of the dome
Cracked, weathered foam along the lower edge of the dome
Cracked, weathered foam along the lower edge of the dome
Driveway view of the coated dome among trees
Driveway view of the coated dome among trees
Coated dome carport with a parked car
Coated dome carport with a parked car
Coated arched carport openings next to the main dome
Coated arched carport openings next to the main dome
Back of the coated dome with patio chairs on the lawn
Back of the coated dome with patio chairs on the lawn
Coated dome wall with square windows
Coated dome wall with square windows
Coated dome side wall behind a wood fence
Coated dome side wall behind a wood fence
Coated dome and arched carports seen from the driveway
Coated dome and arched carports seen from the driveway
Wide view of the finished dome complex and carports
Wide view of the finished dome complex and carports
Finished dome and garage bays under a blue sky
Finished dome and garage bays under a blue sky
Panoramic view of the finished dome complex from the driveway
Panoramic view of the finished dome complex from the driveway
Rear lawn view of the finished coated dome
Rear lawn view of the finished coated dome
Rear lawn view of the finished dome with patio chairs
Rear lawn view of the finished dome with patio chairs
Finished dome and carports from the gravel drive
Finished dome and carports from the gravel drive
More Projects

Related Case Studies

Finished silicone-coated roof with rooftop units
Government & Military

United States Space Force

Restoration of an existing TPO roof on a U.S. Space Force facility with a liquid-applied silicone coating and embedded granules, in place of a planned EPDM membrane swap.
View Case Study
Aerial view of UCHealth Memorial Hospital in Colorado Springs
Healthcare

UCHealth Memorial Hospital

Silicone coating restoration over a modified bitumen roof on an active hospital in Colorado Springs, including the helicopter pad, with 964 concrete pavers removed by hand.
View Case Study
Aerial view of the South Platte Renew wastewater treatment plant
Water & Infrastructure

South Platte Renew

Restoration of a corroded rim on a 500,000-gallon wastewater tank: blasted to near-white metal and sealed with fast-setting polyurea in a 36-hour push, replacing a failed epoxy coating.
View Case Study